ElectroSafety

The Portable Appliance PAT Testing Site of JPS Calibration Services Ltd

Home | About Us | PAT Testing | Microwave Testing | Standards | Contact Us

Introduction

Why PAT Test?

PAT Legislation

PAT Test Rogues

Responsibility

Equipment Types

Appliance Types

PAT Failure Modes

PAT Pricing

PAT FAQ's

Testing Frequency

Inspection & Testing

Competency in PAT

Visual Inspection

Electrical Testing

RCD Testing

PAT Records

Plug Fuses

Flex Replacement

Plug Replacement

Extension Leads

Customer Feedback

Portable Appliance Testing

( PAT Testing )

Be Safe Be Legal Be Tested
JPS are accredited with NAPIT (National Association of Professional Inspectors and Testers
PAT Test - Appliance Type

There are 3 main types of appliance commonly encountered in normal business and domestic environments.

Class1

Class1 equipment is defined as equipment where protection against electric shock is achieved by using basic insulation and also by providing a means of connecting the conductive parts that could become "live", if the insulation fails,to the protective earthing conductor in the fixed installation wiring.

Class1 equipment relies upon a satisfactory earth in the fixed installation , and connection to it, to ensure its safety. Portable Appliance testing of Class1 appliances only tests the integrity of the earth connection in the appliance and cannot test for the integrity within the fixed wiring. It is therefore also a requirement to have periodic fixed wiring installation tests.

ClassII

Class II equipment is defined as equipment in which protection against electric shock is provided by basic insulation and additional supplementary or reinforced insulation. Commonly descibed as doubly insulated. These appliances do not rely upon installation conditions and should have no provision for protective earthing.

Class III

Class III equipment is defined as equipment that relies on supply from a SELV ( Safety extra low Voltage ) source to protect against electric shock.

Site Map | Disclaimer

JPS Calibration Services Ltd
13 St Giles Close
Wendlebury
Bicester
Oxfordshire
UK
OX25 2PZ
Tel +44 (0)845 17025 00
Fax +44 (0)845 17025 01
email enquiries@JPS-Cal.co.uk

Copyright © 2005 JPS Calibration Services Ltd

web design by Web Initial