ElectroSafety

The Portable Appliance PAT Testing Site of JPS Calibration Services Ltd

Home | About Us | PAT Testing | Microwave Testing | Standards | Contact Us

Introduction

Why PAT Test?

PAT Legislation

PAT Test Rogues

Responsibility

Equipment Types

Appliance Types

PAT Failure Modes

PAT Pricing

PAT FAQ's

Assessing Frequency

Inspection & Testing

Competency in PAT

Visual Inspection

Electrical Testing

RCD Testing

PAT Records

Plug Fuses

Flex Replacement

Plug Replacement

Extension Leads

Customer Feedback

Portable Appliance Testing

( PAT Testing )

Be Safe Be Legal Be Tested
JPS are accredited with NAPIT (National Association of Professional Inspectors and Testers
PAT Test Responsibilities

The Electricity at Work regulations states that:

"No person shall be engaged in any work activity where technical knowledge or experience is necessary to prevent danger, or where appropriate, injury, unless he possesses such knowledge or experience, or is under such degree of supervision as may be appropriate having regard to the nature of the work".

The IEE Code of Practice states:

those carrying out the inspection and testing must be competent to undertake the inspection and, where appropriate, testing of electrical equipment and appliances having due regard of their own safety and that of others. What should be considered is that the 'danger' to be prevented, includes not just the dangers which may arise during the testing procedure to the tester and others, but also the dangers which may arise at a later date as a result of using equipment which has not been effectively tested.

The tester must have an understanding of the modes of electrical, mechanical or thermal damage to electrical equipment and appliances and their flexes which may be encountered in any environment.

Training must include the identification of equipment and appliance types to determine the test procedures and frequency of inspection and testing. Persons testing must be familiar with the test instruments used and in particular their limitations and restrictions so as to achieve repeatable results without damaging the equipment or the appliance.

Site Map | Disclaimer

JPS Calibration Services Ltd
13 St Giles Close
Wendlebury
Bicester
Oxfordshire
UK
OX25 2PZ
Tel +44 (0)845 17025 00
Fax +44 (0)845 17025 01
email enquiries@JPS-Cal.co.uk

Copyright (c) 2005 JPS Calibration Services Ltd

web design by Web Initial

Home | About Us | PAT Testing | Microwave Testing | Standards | Contact Us

ElectroSafety

The Portable Appliance PAT Testing Site of JPS Calibration Services Ltd